Procedure to Change STC DSL/Fiber Optic Modem Password

If you talk about the internet speed in Saudi Arabia, there is no comparison to the speed offered by the STC through their DSL and Fiber Optic service. Unlike other Wi-Fi internet connections like Zain and Mobily in which it is easy to change the password, the procedure to change STC DSL/Fiber Optic Modem password takes a big deal. There are two kinds of modems offered by the STC. The Procedure to Change STC DSL/Fiber Optic Modem Password of Alcatel is different from Huawei. I have explained both procedures below.

Also Read:  5 Reasons people avoid answering calls from unknown numbers

Procedure to Change STC DSL/Fiber Optic Alcatel Modem Password

‘Alcatel GPON ONT Settings:

Launch web browser, type:  http://192.168.1.1 in address bar

Enter User Name: admin and Password: admin, click OK

Click on Network then WAN

Enter STC Broadband Username and Password

Click on Apply

Wireless Settings:

Select “WIFI” then “SSID1”

Enter:

SSID: Wireless network name

Wireless SSID Broadcast: Enable

Wireless SSID Enable: Enable

Security Mode: WPA/WPA2 Personal

Personal Key: Password for wireless network

Click “Apply”

Procedure to Change STC DSL/Fiber Optic HUAWEI Modem Password

‘HUAWEI ONT Settings:

Launch web browser, type: 192.168.100.1 in address bar

Enter User Name: telecomadmin and Password: admintelecom, click Log in

Select WAN

Click on (1_INTERNET_R_VID_10)

Enter STC Broadband Username and Password

Click on Apply then system tools and click on save configuration

Wireless Settings:

Select WLAN

Enter

SSID: Wireless network name

Authentication Mode: WPA-PSK

Encryption Mode: TKIP null

Pre-shared Key:  Wireless network password

Click on Apply then system tools and click on save configuration’

error: Content is protected !!